Results 1 to 2 of 2

Thread: Installed new exhaust, now hearing noises??

  1. #1
    Junior Member
    Join Date
    Nov 2022
    Location
    SD
    Posts
    1

    Red face Installed new exhaust, now hearing noises??

    I removed my exhaust on my 2014 L99 SS Camaro and installed a flowmaster setup. I checked fit and clearance and everything seemed fine. The problem is that when i started driving it very slowly, around 10 mph, I started hearing loud vibrations from the back end. Is this the emergency brake? I cant think of what else it could be.

  2. #2
    Junior Member
    Join Date
    Nov 2022
    Location
    West Coast
    Posts
    7
    Check the tunnel brace. I had a setup that I put in and it was rubbing the tunnel brace, so I had to move the whole thing up and backward. Put some washers in, if need be, or get an aftermarket brace. If you want, take the tunnel brace off and test drive it to see if the noise remains. If it's gone, that was the issue. Common issue.

Members who have read this thread: 0

There are no members to list at the moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •